китайской пресс-формы
Добавлено: 23 июн 2011, 15:23
Dear all Russian Friends (Users & Engineers who worked with Chinese Moulds):
About our Chinese moulds, Here, I had wroted many words before.
But today, I still want to write something, Because there are many Engineers have a wrong impression with our Chinese moulds.
As I know, Mould bussiness in Russian market, near about 70% from Huangyan city (Taizhou).
few years ago, because many Russian User have language problems, they buy moulds from sales or trading companies. but trading companies are business companies, they notice more in price, not in quality and technics, that is why many Russian Users know Chinese moulds price is very cheaper but poor quality.
(Maybe those business companies people saw these words will angry with me, I am sorry.)
Of course, now many business companies know this and will care more in technics.
Today, I do not say 100% of Huangyan moulds are bad.
But in PET preform mould, I can say 100% of Huangyan moulds are bad.
Because PET preform moulds maufacturers, in China, till now, mainly focused on 2 areas, Guangdong and Huangyan. But more of us know Guangdong moulds are really good quality but in high prices, that is why these 2 years, there are many mould manufacturers dead in Guangdong. Because Huangyan mould price really too cheap, no any competitive chance.
In our city and Shanghai Kunshan also famous in Mould manufacturers, but half percent manufacturers do domestic business, then there are also near about 60% manufacturer are in bad quality.
but another 30% - 40% companines mainly competite to European markets, hope can be in autoparts business.
(Because autoparts moulds profits are better than other plastic moulds.)
that is why these few percent good manufacturers lost CIS markets.
Now, our company start notice CIS markets, and have some clients and users in CIS, even few clients, but no one response us bad news. Maybe it is our fortunate.
we have some maintenance experience for Russian plastic factories for their Chinese moulds which are not our moulds, maily from Huangyan, but have problems.
we got some minds, usually problem happend in these points:
1) Hot runner system
2) Cooling system
3) Steel material and HRC
4) Mould design and structure
5) Machining precision
--------------- above are mould quality problem
6) Operation & Adjustment
7) Automatic working in cold runner
--------------- Above are from Users problem
Before few days, we joined in ROSMOLD-2011 exhibition in Moscow, it is our first time for exhibition in CIS.
we were very happy and also got some ideas for future development.
After exhibition, we had 1 day for tourist, but our good friend (one of our Moscow client) drive us to his hometown and invited us to his house for supper, really nice, I saw many weddings.
He also took us to their workshop in his hometown, even in saturday, their injection molding machine also in working, he told us there were some problems in production, many products are defective products.
we checked all the moulds are from Huangyan manufacturers. (because our moulds still on the ship,had not arrive to their workshop).
Our Chief Engineer and I stay there, try to help them for checking and adjustment their production lines.
because we only have half day, then we only help them improvement 2 injection molding line.
But our friend is very happy, He told me that:
He really want to give us much thanks, because his engineers always said bad moulds bad moulds, then refuse to adjustment in well working, and much bad emotions.
but our Engineer gave them a good lesson, because even bad moulds, still can work out good products.
Also told them, a good Engineer should have more patient, and think what reason caused these problem, then think ideas to solve problems. because some adjustment will cost much time.
Even we just done little helps, but this small experience also told us, operation & adjustment also is very important items for users.
Ok, I write much again,
welcome friends throw "bricks" to me . 8-)
I hope, near future, I will hear more friends here say : Good Chinese Moulds.
About our Chinese moulds, Here, I had wroted many words before.
But today, I still want to write something, Because there are many Engineers have a wrong impression with our Chinese moulds.
As I know, Mould bussiness in Russian market, near about 70% from Huangyan city (Taizhou).
few years ago, because many Russian User have language problems, they buy moulds from sales or trading companies. but trading companies are business companies, they notice more in price, not in quality and technics, that is why many Russian Users know Chinese moulds price is very cheaper but poor quality.
(Maybe those business companies people saw these words will angry with me, I am sorry.)
Of course, now many business companies know this and will care more in technics.
Today, I do not say 100% of Huangyan moulds are bad.
But in PET preform mould, I can say 100% of Huangyan moulds are bad.
Because PET preform moulds maufacturers, in China, till now, mainly focused on 2 areas, Guangdong and Huangyan. But more of us know Guangdong moulds are really good quality but in high prices, that is why these 2 years, there are many mould manufacturers dead in Guangdong. Because Huangyan mould price really too cheap, no any competitive chance.
In our city and Shanghai Kunshan also famous in Mould manufacturers, but half percent manufacturers do domestic business, then there are also near about 60% manufacturer are in bad quality.
but another 30% - 40% companines mainly competite to European markets, hope can be in autoparts business.
(Because autoparts moulds profits are better than other plastic moulds.)
that is why these few percent good manufacturers lost CIS markets.
Now, our company start notice CIS markets, and have some clients and users in CIS, even few clients, but no one response us bad news. Maybe it is our fortunate.
we have some maintenance experience for Russian plastic factories for their Chinese moulds which are not our moulds, maily from Huangyan, but have problems.
we got some minds, usually problem happend in these points:
1) Hot runner system
2) Cooling system
3) Steel material and HRC
4) Mould design and structure
5) Machining precision
--------------- above are mould quality problem
6) Operation & Adjustment
7) Automatic working in cold runner
--------------- Above are from Users problem
Before few days, we joined in ROSMOLD-2011 exhibition in Moscow, it is our first time for exhibition in CIS.
we were very happy and also got some ideas for future development.
After exhibition, we had 1 day for tourist, but our good friend (one of our Moscow client) drive us to his hometown and invited us to his house for supper, really nice, I saw many weddings.
He also took us to their workshop in his hometown, even in saturday, their injection molding machine also in working, he told us there were some problems in production, many products are defective products.
we checked all the moulds are from Huangyan manufacturers. (because our moulds still on the ship,had not arrive to their workshop).
Our Chief Engineer and I stay there, try to help them for checking and adjustment their production lines.
because we only have half day, then we only help them improvement 2 injection molding line.
But our friend is very happy, He told me that:
He really want to give us much thanks, because his engineers always said bad moulds bad moulds, then refuse to adjustment in well working, and much bad emotions.
but our Engineer gave them a good lesson, because even bad moulds, still can work out good products.
Also told them, a good Engineer should have more patient, and think what reason caused these problem, then think ideas to solve problems. because some adjustment will cost much time.
Even we just done little helps, but this small experience also told us, operation & adjustment also is very important items for users.
Ok, I write much again,
welcome friends throw "bricks" to me . 8-)
I hope, near future, I will hear more friends here say : Good Chinese Moulds.
